UFELE Electric — Solar Pumping, Industrial Drives and PV Protection
Email: sale@ufele.com | B2B Supply and OEM Orders
UFELE supplies low voltage electrical products used for power distribution, control systems, building electrical systems, small equipment control, and distributor stock programs. The range includes AC circuit breakers, RCBO, RCCB, AC surge protection devices, AC contactors and modular contactors for electrical equipment in distribution boxes and control panels.
Low voltage inquiries are often mixed orders. A buyer may ask for several MCB ratings, RCCB options, contactors, SPDs and accessories together. To avoid confusion, send the product type, current rating, pole number, voltage, quantity, packing request and destination market before final item selection.
Similar ratings can look close in a mixed order. Product codes, pole numbers, carton marks and labels should be checked early.
Low voltage products are often bought as a range rather than one single model for power distribution and control systems. A distributor may need several current ratings. A panel builder may need breakers and contactors together for electrical equipment layouts. A building project may compare RCCB, RCBO and modular contactor options before the final order is fixed.
Used in distribution boxes and low-voltage electrical systems where overload and short-circuit protection are needed for power distribution circuits. Buyers normally check current, pole, breaking capacity, curve, voltage and box space.
Used where leakage or residual current protection is required. The buyer should check rated current, pole number, residual current setting, curve if applicable and whether overcurrent protection is included.
Used for AC-side surge protection in power distribution systems, helping protect sensitive electrical equipment from transient overvoltages. Selection should consider pole configuration, system voltage, discharge capacity, installation position and circuit layout.
Used for switching and controlling AC loads in motor control systems, especially motor circuits. The buyer should confirm current, coil voltage, auxiliary contacts, motor power, thermal relay and circuit breaker matching.
Used for remote switching of lighting, household appliances, light-duty inductive loads and building electrical systems. Buyers normally select a modular contactor by load type, rated current, control voltage, contact arrangement and panel module width.
Distributor orders for low voltage supplies usually need a clean product matrix, carton marks, item labels, product photos, datasheets and repeat order records. Similar electrical equipment ratings should be separated clearly.
Use this table to prepare a first inquiry. Exact model numbers, certificate files and packing details should be confirmed with the current product file before order approval.
| Product Group | Model Examples | Available Ratings | What Buyers Should Confirm |
|---|---|---|---|
| AC MCB | FMB1-63, FMB1-125, FMB8, DPN, DZ47-63K | Vary by model — confirm the current datasheet | Trip curve, rated voltage, breaking capacity, pole arrangement, package quantity |
| RCBO | JCB2LE-80 | Vary by model — confirm the current datasheet | Residual current type, curve, breaking capacity, pole configuration, market requirement |
| RCCB | F360 RCCB | Vary by model — confirm the current datasheet | Required residual-current sensitivity and type, pole, rated current, product file version |
| AC SPD | USP2 AC SPD | Vary by model — confirm the current datasheet | Type 1/2/3, Uc, Up, Iimp or In/Imax as applicable, earthing system, backup protection |
| AC Contactor | LC1-D, NLC1-D | Vary by model — confirm the current datasheet | AC-1/AC-3 utilization category, Ie, coil voltage/frequency, auxiliary contacts |
| Modular Contactor | LNC1 series | Vary by model — confirm the current datasheet | Load type, rated current, control voltage, contact arrangement |
A low voltage electrical order for power distribution or control systems can look simple until the item list gets mixed. One carton may contain several MCB ratings. Another line may have RCCB and RCBO that look similar but do different jobs. Contactor orders may need different coil voltages even when the current looks the same.
This is why a spreadsheet is often better than a long message. List the product code, current, pole, voltage, quantity, packaging request and market. If the buyer needs private label or barcode work, those details should be added before production, not after cartons are packed.
Low voltage products appear in many different power distribution and electrical systems applications, but the buying logic changes by use. A household distribution box, a control cabinet and a distributor stock order do not ask for information in the same way.
MCB, RCCB, RCBO and SPD products are commonly discussed for power distribution box layouts in residential and commercial buildings.
Control panels and industrial control systems may use breakers, contactors, relays and SPD electrical equipment together. Coil voltage and control logic should be checked early.
Modular contactors and protection devices are often used in lighting, appliance, light-duty inductive load and HVAC-related building control systems.
Low voltage suppliers and distributors usually need common ratings, stable carton quantities, product labels, catalog files and repeat order item records.
MCB, RCBO, RCCB, SPD and contactor electrical equipment should not be grouped by current alone. Pole arrangement, breaking capacity, residual-current sensitivity, surge rating or coil voltage may change the product selection.
Low-Voltage Selection Guide
Low voltage product buyers often need product photos, datasheets, barcode labels and carton marks before the shipment leaves. These files are useful for warehouse receiving, local catalog building, online listing and repeat orders.
Build a clean table by product type, model, current, pole, voltage, quantity and carton information before confirming the order.
Private label and distributor orders should confirm product label text, barcode needs and carton marks before production.
Product photos, datasheets, packing photos and available certificate files help buyers prepare local sales and quality files.
These questions are common before buyers send mixed low voltage product inquiries.
Send the product type, rated current, pole number, voltage, breaking capacity or protection function if known, quantity, packing request, label requirement and destination market.
An MCB is mainly used for overload and short-circuit protection. An RCCB is used for residual current or leakage protection. An RCBO combines residual current protection with overcurrent protection in one device.
Yes. Distributor stock orders can be discussed by product range, popular ratings, carton quantity, label needs, product photos, datasheets, barcode requirements and repeat order planning.
Send the contactor current, coil voltage, motor power, auxiliary contact requirement, thermal relay need, circuit breaker matching and quantity.
Private label support can be discussed according to product category, order quantity, label position, packaging style, manual request, barcode needs and destination market.
Low voltage electrical products generally cover AC voltage electrical circuits up to 1000V, including circuit breakers, RCCB, RCBO, SPD and contactors used across power distribution boxes, control panels and building electrical systems.
Share the product type, current, pole, voltage, coil voltage if needed, quantity, packing request and destination market. UFELE will review the item list and confirm the suitable product series before quotation.