UFELE Electric — Solar Pumping, Industrial Drives and PV Protection
Email: sale@ufele.com | B2B Supply and OEM Orders
UsFull Electric Co., Ltd. was established in 2005 in Wenzhou, Zhejiang, China. UFELE Electric is our export-facing brand for electrical products used in solar pumping, motor control, PV protection and low-voltage applications.
This factory page shows the work areas behind applicable orders: component preparation, product assembly, electrical testing, warehouse separation, export packing and order records. The exact manufacturing or supporting-supply route depends on the product and model, so we match factory evidence to the item being quoted or produced.
For overseas buyers, useful factory evidence should identify the actual model, rating, order stage and approved specification rather than show only a general workshop view.
Our factory operations are organized around the product file and the work required for that product family. Inverter orders, wired PV combiner boxes, low-voltage components and private-label mixed orders do not follow one identical route.
The photos below show actual UFELE production work areas for inverter and control-product orders. A typical route can include SMT assembly, DIP assembly, automatic PCB coating, final product assembly, functional testing and packing. The exact route and inspection points depend on the product design, electrical rating and approved order requirements.
Surface-mount components are placed and soldered on automated SMT equipment. Component handling and board batches are controlled against the applicable production file before the boards move to the next stage.
Components that require through-hole insertion are handled on the DIP assembly line. Operators follow the applicable board and component requirements, with visual and process checks before the PCB continues to later production stages.
Selected PCB assemblies pass through the automatic coating process when the product specification requires it. The production route and process settings are matched to the approved model rather than applied as one identical step to every product.
PCB assemblies, housings, fans, terminals and other approved parts are brought together at the final assembly line. The model, electrical rating, accessories and label revision remain linked to the order file during assembly.
Assembled units are connected to test equipment for applicable electrical and operating checks. Test items depend on the model and approved specification and can include running status, parameter response and other model-specific functions.
Multiple units can be connected for production-batch verification before release. Records and checks should stay tied to the model, rating and batch under review instead of relying only on a general workshop inspection.
Units that have passed the required checks move to packing. The team confirms applicable accessories, manuals, labels, inner protection, carton marks and quantity before the finished cartons enter shipment preparation.
UFELE manufactures and supplies several related electrical product groups. The table below explains the typical factory-side focus for each group without implying that every model uses the same production route or test method.
| Product Group | Typical Factory Work | Typical Review Points | Useful Buyer Evidence |
|---|---|---|---|
| Solar Pump Inverters & VFDs | Applicable component preparation, assembly, parameter setup, inspection and packing | Model and rating, function, running condition, label, accessories and approved configuration | Product photos, test records or photos, labels and packing views |
| PV Combiner Boxes | Enclosure preparation, component matching, applicable wiring/assembly and packing | String configuration, installed protection parts, layout, terminal identification, labels and enclosure details | Internal layout views, component list, label and enclosure photos |
| Low-Voltage Electrical Products | Manufacturing or supporting-supply handling according to the model and order | Product code, electrical rating, quantity, lot identification, label and packaging | Model photos, label views, quantity and carton records |
| OEM / Mixed Orders | SKU separation, artwork control, accessories, manuals, packing and shipment preparation | Approved logo/label revision, carton marks, barcode, manuals, SKU count and packing list | Artwork approvals, product photos, inner packing and carton-mark photos |
The factory-side process begins after the product, rating, quantity and commercial requirements are clear. Keeping one approved file through the later stages reduces avoidable errors in models, labels, accessories and packing.
Production handling and quality control have different roles. Factory work moves the order through preparation, applicable assembly, storage and packing. Quality control defines the inspection points, test method, acceptance requirement, defect handling and release decision.
For inverters, combiner boxes and other electrical products, a useful record should identify the model and rating being checked. When a mismatch is found, affected goods should remain separate until the issue is reviewed and the relevant check is repeated.
Mixed B2B shipments are common. A distributor may combine several breaker ratings, protection products, inverters and accessories, while an OEM order may contain several private-label SKUs. Clear separation prevents a correct product from being packed under the wrong label or carton mark.
A general factory photo provides context, but purchasing and supplier-approval decisions usually need evidence tied to the actual product. Buyers can agree the required records before production or packing starts.
Photos can show the enclosure, terminals, accessories, label position and visible rating information for the product under review.
Agreed views can confirm protective material, product orientation, accessories, manuals and separation between SKUs before cartons are closed.
Carton photos can support item-code, shipping-mark, carton-number and outside-condition checks before the shipment leaves the factory.
Practical answers for distributors, project buyers and OEM customers reviewing UFELE before an order.
UsFull Electric Co., Ltd. operates from Lingzhan Road, Kunpeng Street, Dongtou District, Wenzhou City, Zhejiang Province, China. The company was established in 2005 and uses UFELE Electric as its export-facing brand.
UFELE manufactures and supplies products for solar pumping, industrial motor control, PV protection and low-voltage applications. The exact manufacturing, assembly, testing or supporting-supply responsibility depends on the product and model, so we confirm the scope for the item under review.
For suitable orders, buyers can agree model-specific product photos, label views, inspection or test records, inner-packing photos and carton photos. Define the required views and approval point before production or packing so the correct evidence can be prepared.
Yes, compatible OEM and mixed-product orders can be discussed. They require controlled model lists, approved artwork, rating and quantity checks, SKU separation, matched carton marks and final packing-list review.
The approved product and order file connects production with quality control. Factory work handles preparation, assembly or supply control, storage and packing; quality control defines the inspection points, test requirements, acceptance criteria, defect handling and shipment-release checks.
Send the product, model, electrical rating, quantity, destination and any OEM or factory-evidence requirements. We will confirm the relevant manufacturing or supply route, inspection plan and records available for the order.